Tactile Modernist Cabinet Pull
Created 1 months ago
Description
A sleek, minimalist touch for contemporary interiors. This cabinet handle pairs a clean, soft-edge cylindrical profile with a thoughtful finger scoop carved into the underside. Designed to meet the hand naturally, the bar aligns effortlessly with modern design sensibilities, offering a refined and tactile grip that elevates everyday cabinetry.
Hardware Specifications
- Standard Mount: 96mm screw centers for easy retrofitting or new installations
- Total Footprint: 130mm overall length
- Clearance: 35mm standoff from the cabinet face
- Profile: 16mm diameter featuring an ergonomic under-scoop
Images
More like this
Explore more in Home & Fixtures →
Right-Angle L-Bracket
A precision right-angle L-bracket designed for structural reinforcement, shelving, or frame assembly. The arms measure 50mm from the outer corner, providing a solid footprint for joining operations. The model is oriented on its side by default. Printing the bracket in this orientation aligns the filament lines continuously along the L-shape, which maximizes bending strength and prevents snap-failures along layer lines. Dimensions: 50mm outer arm length, 15mm width. Material Thickness: 4mm uniform depth. Mounting: Two 5mm clearance holes, centered on the usable flat area of each arm. Print Settings: Minimum 3 walls/perimeters recommended for load-bearing applications.
CoreGrip — 50mm L-Bracket
A robust 50mm L-bracket designed for general mounting, repairing furniture, and structural bracing. The model is oriented to lie completely flat on the build plate. This ensures the layer lines run normal to the bending plane, giving the part maximum physical strength and preventing it from snapping under load. Dimensions Arms: 50mm long each Material Thickness: 4mm Overall Width: 20mm Mounting Interface: Two holes, each 5.2mm in diameter (to comfortably clear standard 5mm screws), located in the center of their respective arms.
30mm Knurled Mushroom Drawer Knob
A mushroom-profile knob designed for drawers and cabinets. The exterior cap band features a textured knurl to ensure grip when handled with wet fingers, making it suitable for kitchen or bathroom environments. An M4 clearance hole runs centrally through the entire assembly for hardware installation. Dimensions & Fitment Cap diameter: 30mm Overall cap height: 18mm Stem diameter: 12mm Fastener compatibility: Continual M4 through-hole Grip profile: Knurled outer margin
8.5mm Rod Square Drop-On Sleeve
Square profile sleeve that slips onto a toilet roll holder rod to increase rolling friction, deterring toddlers from unspooling the paper. Fitment: 8.5mm diameter holder rods Outer Profile: 25x25mm square, 90mm tall Installation: Direct drop-on over the existing rod Note: Make sure to check your holder's rod diameter before printing. Prints upright without supports; PETG is recommended for durability.
Geriffelte Pilzkopf-Schraubenkappe
Diese aufschraubbare Kappe verdeckt scharfkantige Holzschrauben, die aus Brettern oder Platten herausragen. Die Form erinnert an einen klassischen Drehknopf und bietet durch die seitlichen Aussparungen sicheren Halt beim Festziehen. Selbstschneidend: Das innere Loch ist konisch geformt (4,2 mm unten, 3,0 mm oben). Das grobe Gewinde der Holzschraube frisst sich beim Aufdrehen von selbst fest. Sicherer Abschluss: Entschärft gefährliche Spitzen und verhindert Kratzer. Druckfertig: Benötigt keine Stützstrukturen, druckt flach auf dem Druckbett.
Roll spinning slower - 25mm Toilet Roll Drop-On Sleeve
A 25mm diameter sleeve that slips over a standard 9.5mm toilet roll holder to increase rolling friction and deter toddlers from unspooling the roll. Dimensions: 90mm tall, 25mm outer diameter Fitment: 9.5mm central bore with a matching 9.5mm side slit for direct drop-on installation Use: Prints upright. PETG recommended for durability, though PLA is sufficient for a drop-on fit without flexing.