Pi 4 Weather Station Housing
Created 27 days ago
Description
A two-section weather station housing designed for the Raspberry Pi 4. The base features standard mounting points for the board and extensive cutouts to allow clearance for power, USB, and ethernet connections, as well as external flanges for securing the assembly onto a post or wall. An overlapping top lid shields the components from light weather and integrates a raised sensor bracket platform.
Features include:
- Pi 4 Interface: Standoffs pitched at 58x49mm.
- Component Access: Generous port windows block weather from the top but allow standard cable runs.
- Sensor Deck: Flat top deck with 4.5mm fastening holes spaced at 30mm for weather instrumentation.
- Mounting Integration: Twin 60mm side wings with M5 fastener holes for mounting to a surface or mast board.
Images
More like this
Explore more in Home & Fixtures →
8.5mm Rod Square Drop-On Sleeve
Square profile sleeve that slips onto a toilet roll holder rod to increase rolling friction, deterring toddlers from unspooling the paper. Fitment: 8.5mm diameter holder rods Outer Profile: 25x25mm square, 90mm tall Installation: Direct drop-on over the existing rod Note: Make sure to check your holder's rod diameter before printing. Prints upright without supports; PETG is recommended for durability.
Geriffelte Pilzkopf-Schraubenkappe
Diese aufschraubbare Kappe verdeckt scharfkantige Holzschrauben, die aus Brettern oder Platten herausragen. Die Form erinnert an einen klassischen Drehknopf und bietet durch die seitlichen Aussparungen sicheren Halt beim Festziehen. Selbstschneidend: Das innere Loch ist konisch geformt (4,2 mm unten, 3,0 mm oben). Das grobe Gewinde der Holzschraube frisst sich beim Aufdrehen von selbst fest. Sicherer Abschluss: Entschärft gefährliche Spitzen und verhindert Kratzer. Druckfertig: Benötigt keine Stützstrukturen, druckt flach auf dem Druckbett.
Roll spinning slower - 25mm Toilet Roll Drop-On Sleeve
A 25mm diameter sleeve that slips over a standard 9.5mm toilet roll holder to increase rolling friction and deter toddlers from unspooling the roll. Dimensions: 90mm tall, 25mm outer diameter Fitment: 9.5mm central bore with a matching 9.5mm side slit for direct drop-on installation Use: Prints upright. PETG recommended for durability, though PLA is sufficient for a drop-on fit without flexing.
Heavy Duty Fold-Away Bench Bracket
A heavy-duty, 3-part foldable support bracket designed for full-size desk benchtop panels. The model anchors to the wall on a broad footprint, deploying horizontally and locking into place with an interlocking diagonal truss mechanism. What it's for Perfect for drop-down workbench extensions, folding laundry tables, and space-saving wall desks. It folds flat vertically against the wall when unlatched. You lift the desk slightly to free the strut's cross-pin, which allows it to slide back through the track and stow flush. Dimensions Overall depth from wall: ~200mm (scale up in your slicer for exceptionally deep boards, though this is robust). Wall plate: 160mm tall, 34mm wide footprint with 6mm countersinks. Component clearance: ~0.5mm built-in gaps for smooth mechanism action without slop. Print notes Lay the parts flat on their sides on the bed (the long faces) to guarantee layer strength along the lever arms. Designed to use standard 8mm (M8) bolts or rods through the main pivots for robust sheer strength. Because a desk handles a lot of leverage, use high-infill PETG or ABS/ASA. Standard PLA could creep heavily under loads holding up heavy wood.
AquaDart — Garden Hose Nozzle
AquaDart introduces a streamlined approach to targeted water pressure. This single-piece nozzle adapts a standard garden hose down to a precise 0.2-inch exit stream. The internal geometry is specifically contoured to accelerate water smoothly, while the exterior features deep grooves for secure hand-tightening even when wet. Dimensions Overall height: 63 mm Base diameter: 38 mm (at the grip) Exit bore: 5.08 mm (0.2 inches) Interface: Standard 3/4" Female Garden Hose Thread (11.5 TPI) Compatibility & Usage Designed to thread directly onto standard North American garden hoses and spigots. Requires a standard rubber hose washer to sit on the internal ledge. Without the rubber washer, standard garden hose threads will leak under pressure. Print Notes Prints completely completely upright and support-free as oriented. Thick walls (4+ perimeters) and 100% infill are heavily recommended to contain the water pressure and prevent layer separation. PETG or ABS is preferred if this will be left outdoors in the sun.
Planter Solar Canopy Mast
Plants roast in direct midday sun while flat-laying solar panels waste table space and inevitably get knocked onto the floor. This cantilevered mast bolts directly to the back of the soil basin, hoisting a 140mm square solar mounting plate squarely over the canopy. It acts as an umbrella for the soil while capturing the light that would otherwise scorch the leaves, keeping the footprint entirely vertical. Mast Clearances Mast Height: 250mm from soil rim to canopy plate Mount Plate: 140x140mm flat surface Standoff Base: 40mm wide clamping surface against the basin wall