110mm Triangular Phone Stand
Created 2 months ago
Description
A rigid phone stand with a truncated back. The overhanging vertical rest has been clipped, terminating the structure at the brace point to form a closed, structural triangle that reduces overall height while maintaining a 65-degree device angle.
Parameters and capacity:
- Backrest Height: 110mm apex.
- Viewing Angle: 65 degrees from vertical.
- Ledge Depth: 24mm for clearance of thick cases.
- Frame Structure: 6mm width, extruded to 76.2mm.
Images
More like this
Explore more in Desk & Tech →
110mm Triangular Phone Stand
A rigid phone stand with a truncated back. The overhanging vertical rest has been clipped, terminating the structure at the brace point to form a closed, structural triangle that reduces overall height while maintaining a 65-degree device angle. Parameters and capacity: Backrest Height: 110mm apex. Viewing Angle: 65 degrees from vertical. Ledge Depth: 24mm for clearance of thick cases. Frame Structure: 6mm width, extruded to 76.2mm.
Deep-Ledge 65-Degree Phone Stand
A rigid phone stand angled at 65 degrees, proportioned to clear lower screen content while retaining devices in thick cases. Requisite bracing is extruded into a single dimension to maintain a flat footprint and minimize material usage. Features: 24mm deeper retaining ledge for armored or wallet cases. Reduced 9mm front lip height to prevent screen obstruction. 65-degree optimal viewing incline. Rigid 6mm profile. Overall capacity accommodates devices around 3 by 7 inches.
Aura — Minimalist Frame Stand
A minimalist, Scandinavian-inspired phone stand designed to strip away visual bulk while maintaining perfect stability. The aggressive, blocky wedge has been replaced by a light, flowing frame that relies on deep curves and negative space. Features Floating Frame: A wide central cutout reduces the structure to two elegant, 8mm sweeping rails. Organic Silhouette: Deeply rounded outer corners mimic the look of bent plywood or softened aluminum. Maintained Utility: Keeps the exact 45-degree viewing angle and the elongated footprint to fully support larger phones without tipping.
Index Card Desk Sign
A minimalist desktop stand that holds a standard 4x6-inch index card in landscape orientation. The frame is tilted back at 15 degrees for optimal reading from a seated position, and features an open-top U-shape slot so cards can be dropped in or swapped out instantly. No Supports Required: Prints perfectly flat on its base, with the frame angled to avoid steep overhangs on the inner cavity. Drop-In Fit: Sized at 154mm x 103mm internally to easily accommodate standard and slightly oversized cards. 4mm Retaining Lip: Overlaps the bottom and sides of the card just enough to hold it flat without covering your text.
Vertical Dual Laptop Stand
A heavy-duty vertical dock built to hold a work and personal laptop side-by-side on a single desk. By standing the machines on their edges, it drastically cuts their footprint. Pass-through cutouts on the sides provide a direct way to feel the chassis for heat buildup without lifting either machine out of its slot. Remix Hooks Slot Dimensions: The base model uses symmetrical 20mm slots. These are the first parameters to adjust if pairing a slim ultrabook with a thicker workstation. Mass vs. Material: The 15mm center divider, 15mm floor, and 14mm outer walls are sized to provide enough physical weight to prevent two tall machines from tipping. Slimming down the outer walls will save filament but means the stand will likely need double-sided tape to stay anchored. Expansions: The flat outer faces are prime real estate for boolean additions like USB hub mounts, hex-grids, or cable routing channels.
Screw-Clamp Tripod Phone Mount
A rigid tripod mount designed to secure mobile phones for hands-free filming. The design uses a threaded screw mechanism instead of a printed spring, ensuring the clamping force remains consistent without material fatigue over time. The base includes a slot designed to capture a standard 1/4-20 hex nut for mounting to standard camera equipment.\n\nFeatures of this mount include:\n Adjustable grip range accommodating devices from 60mm to 85mm wide.\n Chamfered jaw faces to hold the device securely without marring the edges.\n A captive nut slot at the base for standard 1/4-20 tripod hardware.\n A freely spinning upper jaw pad that presses flat against the device during tightening.