Hexagonal Space Wedding Planter
Created today
Description
A simple, flat-faced hexagonal planter designed to tessellate easily for bulk printing. The straight walls ensure flawless surface details without the sagging you get on angled faces. Two of the faces feature vertical embossed text with small stars, and the remaining faces carry subtle celestial elements.
- Remix Hooks: Two faces are currently left entirely blank, making this a perfect canvas to map your own constellations, drop in an SVG logo, or add extra text.
- Dimensions: Roughly 90mm across the flats (45mm circumscribed radius) and 60mm tall, with a solid 3mm wall.
- Printing: Prints flat on the base with zero supports required. The straight sides allow them to pack tightly together on the build plate.
Photos
Technical views
More like this
Explore more in Gifts, Seasonal & Personalized →
High Roller — Casino Poker Chips
Classic casino-style poker chips ready for game night. Designed at regulation size (39mm diameter, 3.3mm thickness) but tailored for easy single-color printing, featuring embossed values that pop nicely, indented edge spots, and an accent rim. Each chip value is kept as a separate component for straightforward batch printing in their traditional colors. Features Regulation Sized: 39mm × 3.3mm standard dimensions. Double-Sided Embossing: Bold denomination values raised by 0.3mm to ensure they stand out without surpassing the protective rim. Casino Rim Details: Realistic edge notches and accent rings to capture the feel of standard clay chips. Flat Printing: Completely flat resting surface for effortless adhesion without supports. Print notes No supports needed. Print with 100% infill to give them a heavier, more authentic feel in the hand. A subtle color swap or painting the raised center text will make the values instantly readable across the table.
CastMate — Relief Wand
The CastMate is a specialized relief wand designed for the unique torment of spending six weeks in a fiberglass cast. Engineered to address the itch from hell, its long, slender profile reaches deep down the arm or leg. Every edge along the shaft is aggressively rounded to ensure it slides smoothly against the skin without snagging, while the working end features three blunt, precise ridges to soothe the itch safely without breaking the skin. Features Extended Reach: At a full 300mm long, it accesses those impossible-to-reach areas midway down the cast. Blunt Relief Ridges: Gently raised bumps provide satisfying friction while remaining completely safe for sensitive, enclosed skin. Print-in-Place Profile: A flat base allows for simple, flat-on-the-bed printing with zero supports required. Ready Access: An integrated rear hole is sized for a loop of cord, letting the wand hang conveniently from the arm of the sofa where it’s needed most. Dimensions Length: 300mm Width: 8mm Thickness: 3mm
Andy Crown Nameplate
What it's for A personalized desk sign featuring the name "Andy" standing strongly upright on a sturdy, slightly chamfered base platform. It features a separate accessory crown printed off to the side, which has been measured perfectly with a flat base so you can actually pick it up and sit it squarely on top of the 'A'. Dimensions Base platform: 140 mm wide by 25 mm deep, providing excellent stability so it won't tip over. Text: Impressively thick 8 mm letters standing ~32 mm tall on top of the platform. Accessory: The little crown spans about 24 mm across its jewelled points and matches the 8 mm thickness of the text. Print notes Both the main sign and the crown piece have been oriented with their back faces perfectly flush with each other. For the best result with absolutely zero supports needed, just lay both models entirely flat on their backs in your slicer before printing and it will come off the bed flawlessly.
Sinking Wireframe Football Skeleton
What it's for An open-lattice prolate spheroid designed to mimic the profile of an American football. The heavy tubular skeleton construction ensures no air gets trapped, allowing the model to sink gracefully when printed in a dense material. All outer surfaces are built from rounded profiles to eliminate sharp edges. Dimensions Length: 220 mm Diameter: 130 mm at the equator Rib Thickness: 16 mm tubular cross-section Print notes The model features a flattened tip at one end to provide a stable resting face for the print bed. To ensure it sinks effectively, print using a naturally dense filament with 100% infill. Extensive supports will be required to handle the overhanging horizontal rings and upper archway.
Calavera Sugar Skull Mask Day of the dead mask
A rigid 3D mask shell styled after the classic calavera sugar skulls seen during Día de los Muertos. The base follows a standard adult face profile, heavily cut away and overlaid with raised decorative features that wrap smoothly around the compound curve of the surface. Detail Work Orbits: Wide, round cutouts ringed by a heavy scalloped floral border. Bridge: Classic inverted heart cutout for the nose, framed by a continuous raised rim. Jawline: Fluted skeletal teeth intersecting a wide horizontal mouth slit, all inset within a rounded bezel. Accents: Radial flower blooms on the forehead and chin, flanked by teardrop swirls across the cheeks.
Antiquity Signet Ring
A classic signet-style band featuring a flattened bezel to host the engraving. Sized to roughly a US men's 10 (20.2mm inner diameter), it includes inner comfort bevels to soften the top and bottom edges against the finger. The face is deeply engraved with the classical Latin inscription VTERE FELIX (wear in good health). Design Notes Inner diameter: 20.2mm Band width: 9mm Profile: Tapered outer hull transitioning into a 16mm wide flat face Font: Forum (Display) for a traditional Roman cut