19mm Sharpener Shavings Catcher Cup
Created 1 months ago
Description
A replacement reservoir for collecting wood and graphite waste from 19mm-barrel pencil sharpeners. It incorporates a bayonet mount to replace standard friction-fit designs, ensuring the cup remains fully secured during use. The internal mounting ring narrows from the main body to capture the 19mm interface.
- Dimensions: 50mm overall diameter, 30mm total depth.
- Interface: 19mm bayonet receiver featuring dual internal L-slots.
- Engagement: Quarter-turn rotational lock with upward detents for snap retention.
- Application: Replaces lost or damaged friction-fit catchers on compatible cylindrical sharpeners.
Photos
Technical views
More like this
Explore more in Desk & Tech →
Hexagonal Honeycomb Desk Pencil Cup
A geometric storage vessel featuring a repeating cut-through mesh pattern. Designed to keep writing instruments collected and accessible while maintaining an airy, modern look on your workspace. What it's for Organising pens, pencils, markers, and small tools. The open honeycomb walls allow visibility of shorter items that might otherwise get lost at the bottom. A solid base and rim ensure items stay contained and the structure remains rigid. Dimensions Total Height: 80 mm Base Footprint: 42 mm outer radius (point-to-center). Wall Thickness: 3 mm, balancing durability and print efficiency. Remix ideas Scale the Z-height to create a taller holder for brushes or a shorter dish for paperclips. Adjust the internal diameter to accommodate larger items or create a thicker, heavier footprint for top-heavy tools. Add an interior Y-shaped divider to segment the hexagon into three separate compartments.
80mm Dual-Zone Hexagonal Organizer
A stepped geometric desk organizer designed with an asymmetric internal divider. It serves as an alternative to standard, single-height store-bought cups by offering two distinct storage zones within an 80mm hexagonal footprint. The rear compartment supports tall items like pens and markers, while the front compartment is scaled for smaller desk supplies like paper clips and erasers. Dimensions: 80mm outer diameter, 80mm maximum height. Rear Compartment: Full height (80mm), allocating approximately 60% of the internal floor area. Front Compartment: Partial height (26.6mm), allocating approximately 40% of the internal floor area. Wall Thickness: 2mm external and internal dividing walls.
RetroGrip — D-Shaft Radio Knob
Bring classic hardware back to life with the RetroGrip Radio Knob. Designed as a direct replacement for vintage audio equipment, this knob features a deeply scalloped perimeter for a secure, tactile feel and an embossed triangular dial pointer so you always know exactly where your current setting lands. Specifications Overall Size: 25mm diameter × 15mm depth Grip Style: 36-count scalloped knurling around the perimeter Indicator: Raised triangular pointer facing forward on the top face Compatibility Designed to fit standard 6mm D-shaft pins and potentiometers. The mounting bore is 12mm deep, with the flat mating edge recessed precisely 0.5mm past the center line.
8-Slot PC Cable Comb
A rigid 8-slot cable comb designed to flatten out chaotic PC cable bundles. Spaced precisely for standard 18AWG PSU wires, it includes mounting flanges on either side to pin the whole run tight against a case wall or back panel. Remix Variables Channel Dimensions: Currently set to a 3.5mm width on a 4.5mm pitch. Expand the width to 4mm or higher if you are working with thick sleeved cables. Slot Count: Built for an 8-pin run (like a GPU or EPS cable). Extending the pattern to 24 slots for a 24-pin motherboard main power cable is a straightforward parameter update. Mounting Hardware: The end flanges are drilled for M3 screws with a simple countersink. These can easily be scaled for M4 hardware or removed entirely if you prefer mounting with double-sided tape.
Index Card Desk Sign
A minimalist desktop stand that holds a standard 4x6-inch index card in landscape orientation. The frame is tilted back at 15 degrees for optimal reading from a seated position, and features an open-top U-shape slot so cards can be dropped in or swapped out instantly. No Supports Required: Prints perfectly flat on its base, with the frame angled to avoid steep overhangs on the inner cavity. Drop-In Fit: Sized at 154mm x 103mm internally to easily accommodate standard and slightly oversized cards. 4mm Retaining Lip: Overlaps the bottom and sides of the card just enough to hold it flat without covering your text.
Deep-Ledge 65-Degree Phone Stand
A rigid phone stand angled at 65 degrees, proportioned to clear lower screen content while retaining devices in thick cases. Requisite bracing is extruded into a single dimension to maintain a flat footprint and minimize material usage. Features: 24mm deeper retaining ledge for armored or wallet cases. Reduced 9mm front lip height to prevent screen obstruction. 65-degree optimal viewing incline. Rigid 6mm profile. Overall capacity accommodates devices around 3 by 7 inches.