12mm Schranktür Handtuchhalter
Created today
Description
Ein robuster Handtuchhalter, der exakt über eine 12mm starke Schranktür greift. Konstruiert als flach liegendes Profil, um die Schichten entlang der Belastungsrichtung zu orientieren – das verhindert ein Brechen unter Gewicht.
Ansatzpunkte für eigene Anpassungen
Das Design ist bewusst simpel gehalten, um es schnell an andere Gegebenheiten anpassen zu können:
- Die Türstärke (12mm): Ist der Kern der Konstruktion. Aktuell sind 0.6mm Luft (Clearance) eingerechnet, damit der Halter gut aufgesteckt werden kann, ohne den Lack der Tür zu zerkratzen.
- Die Haken-Ausladung (22mm): Ausreichend für ein gefaltetes Handtuch oder einen Waschlappen. Wer dicke Badetücher aufhängen will, kann diesen Wert problemlos erhöhen.
- Die Breite (25mm): Gibt dem Halter Stabilität gegen seitliches Verrutschen auf der Türkante.
Lässt sich ohne Stützstruktur drucken. Ideal für Küche oder Bad.
Images
More like this
Explore more in Kitchen & Bathroom →
Pizza Angel Cookie Cutter
The worst part about custom cookie cutters is the razor-thin top edge that digs straight into your palms when you press down on cold dough. This cutter stamps out the silhouette of a flying baby angel holding a pizza slice, but more importantly, it includes a wide, flat rim so you can actually use it without bruising your hands. Cutter Dimensions Overall Size: Roughly 80mm wide. Flange: 4.5mm wide base for pressing. Wall Height: 15mm total depth for thick dough. Cutting Edge: Tapers to a sharp 0.6mm at the top. Print this upside down (flange flat on the bed) in PETG or another food-safe material. No supports needed.
Minimalist Cabinet Drop Hook
An over-cabinet hook that drops straight down to provide a long vertical bar for clipping notes, paper towels, or recipes using clothespins. Prints flat on its side for maximum layer adhesion and strength. Fits standard 3/4" (19mm) to 20mm cabinet doors 110mm total vertical drop for plenty of clamping area Prints without supports
Magnetic Deep J Towel Hook
What it's for A robust, support-free hook designed to secure loose kitchen linens to magnetic surfaces. The deep J-curve profile physically captures the fabric, preventing tea towels from sliding off when a refrigerator door is violently swung open or shut. The rear mounting face incorporates a carefully modelled recess to house a standard neodymium disc magnet flush with the surface. Dimensions Overall Width: 28mm to distribute pressure broadly across modern linen weaves. Magnet Recess: 20.2mm in diameter and 5.2mm deep, sized for a standard 20x5mm disc magnet with a drop-in glue fit. Wall Backing: Exactly 1.0mm of solid structural material buffers the magnet from the hook's main interior. Remix ideas Modify the cylindrical recess diameter and depth parameters to suit different magnet stock. Extend the J-curve's front upright lip by 15–20mm to confidently retain thicker items like padded oven mitts. Adjust the overall linear extrusion width down to 10mm if mounting on a very narrow appliance bezel.
5-Point Star Cookie Cutter
A 60mm five-point star cookie cutter designed for clean slicing and comfortable use. The cutter incorporates a wide top lip to distribute pressure across the thumb or palm, preventing discomfort during repeated use on dense dough. The model is oriented flange-down by default to allow the entire piece to print seamlessly without supports. 60mm overall diameter span 18mm cutting height accommodates thicker doughs and fondant 4mm-wide comfort flange protects hands during downward pressure 1mm cutting wall thickness for defined edges
Minimal Toothbrush Neck Rest
A minimal counter stand built to support the necks of two standard manual toothbrushes, preventing handles from rolling and keeping bristles facing up. Features two 18mm cutouts with curved cradles Low-profile 12mm vertical height with a slim 3mm connecting base Relies on the base of the toothbrushes resting directly on the countertop Ideal for manual brushes (not dimensioned for thick electric handles)
Ice Cream Pint Cozy
What it's for A rigid, insulated sleeve designed specifically for standard 16oz (473ml) ice cream pints. The thick tapered walls keep the heat of your hands away from the carton, slowing down the melt and stopping condensation from freezing your fingers. Includes a large bottom hole to prevent suction when inserting the pint and to make it easy to push out when you're done. Dimensions Height: 75 mm (leaves the top of the pint exposed for comfortable eating) Inner Diameter: Tapers from 74 mm at the base to 93 mm at the lip Wall Thickness: 3.5 mm Print notes No supports required. Prints easily in its default upright orientation. TPU can be used if you want a flexible, extra-grippy sleeve, but PLA or PETG works perfectly for a rigid holder.