1-Cup Kibble Strike Scoop
Created 2 days ago
Remixed once
Description
This scoop measures exactly one US cup to the brim, featuring a chamfered strike edge for perfectly level portions when strict weight management is critical. The handle extends 90mm and terminates in a downward clip designed to hang directly over the rim of a pet food bin. Internal fill lines for the half and full marks are physically grooved into the model so they won't rub off over time.
Remix Hooks
- Target Volume: The internal cavity is currently dialed to 74x74x44.78mm (236.6 ml). Adjusting the inner Z-height is the cleanest way to alter the baseline portion size without redrawing the handle.
- Clip Gap: The rear clip drops 25mm. If your storage bin has a thick molded rim or a weather gasket, extend the handle shaft's length to increase the gap before the downward leg.
- Rigidity: Wall thickness is set at 2.4mm to prevent flexing when scraping against the side of a heavy bag. Bump this up if you plan to print in softer materials like PETG.
Photos
Technical views
More like this
Explore more in Kitchen & Bathroom →
Modern Egg Cup with Tray
A modern geometric egg cup designed for soft-boiled eggs. The central holder features a precise 42mm top opening scaled to secure a standard chicken egg, tapering smoothly down into a stable central pedestal. The lower section extends into a wide ring that functions as an integrated tray. This base provides a designated space to drop and hold cracked shell tops during use, keeping the surrounding surface clear of debris. 42mm interior opening fits standard chicken eggs 86mm wide integrated lower ring for catching shell fragments Seamless pedestal design with rounded rims for durability
Square Chipmunk Cup
A square cup that features a raised, chubby-cheeked chipmunk face on the front panel. It works well as a pen cup on a desk or a casual holder around the house. Size: 80mm square by 90mm tall. Construction: 3mm wall thickness with rounded vertical corners for printability and cleaning. Details: Includes embossed cheeks, front teeth, nose, and gently recessed pupils.
Heavybase Safety Razor Stand
A cantilevered stand designed to hang a safety razor inverted, allowing water to drain down the handle rather than pooling in the blade assembly. The top arm features a flared entry slot so the razor can be docked blindly, and the 75mm conical base provides enough footprint to resist tipping when bumped. Remix Hooks & Clearances Hanger Dimensions: The entry slot is cut at 11.5mm to comfortably clear a standard 10mm razor handle, terminating in a 13.5mm seating hole with a countersunk top to center the razor head. Widen these if adapting the stand for thick-handled cartridge razors. Pillar Height: The 121mm vertical pillar provides roughly 106mm of hanging clearance. Elongate this section if designing for an extra-long handle. Base Mass: The current 75mm diameter by 15mm thick base is stable on its own, but slicing with dense infill or pausing the print to embed steel weights will lock it down even further.
Minimal Toothbrush Neck Rest
A minimal counter stand built to support the necks of two standard manual toothbrushes, preventing handles from rolling and keeping bristles facing up. Features two 18mm cutouts with curved cradles Low-profile 12mm vertical height with a slim 3mm connecting base Relies on the base of the toothbrushes resting directly on the countertop Ideal for manual brushes (not dimensioned for thick electric handles)
Ice Cream Pint Cozy
What it's for A rigid, insulated sleeve designed specifically for standard 16oz (473ml) ice cream pints. The thick tapered walls keep the heat of your hands away from the carton, slowing down the melt and stopping condensation from freezing your fingers. Includes a large bottom hole to prevent suction when inserting the pint and to make it easy to push out when you're done. Dimensions Height: 75 mm (leaves the top of the pint exposed for comfortable eating) Inner Diameter: Tapers from 74 mm at the base to 93 mm at the lip Wall Thickness: 3.5 mm Print notes No supports required. Prints easily in its default upright orientation. TPU can be used if you want a flexible, extra-grippy sleeve, but PLA or PETG works perfectly for a rigid holder.
Pizza Angel Cookie Cutter
The worst part about custom cookie cutters is the razor-thin top edge that digs straight into your palms when you press down on cold dough. This cutter stamps out the silhouette of a flying baby angel holding a pizza slice, but more importantly, it includes a wide, flat rim so you can actually use it without bruising your hands. Cutter Dimensions Overall Size: Roughly 80mm wide. Flange: 4.5mm wide base for pressing. Wall Height: 15mm total depth for thick dough. Cutting Edge: Tapers to a sharp 0.6mm at the top. Print this upside down (flange flat on the bed) in PETG or another food-safe material. No supports needed.